How to assemble my gazebo? Pop up gazebo instructions

Andrew

We strive to provide our customers with the best possible products and level of service we can. You will not find a better value pop up gazebo anywhere else!
Our gazebos are really easy to erect and pop up in around 60 seconds. Please read on for assembly and care instructions (also sent out with every pop up gazebo order).

Packaging

Your pop up gazebo will arrive with you, as follows:
Our plain, stock colour canopies and sidewalls are fully waterproof and will be sent out to you in separate boxes for next working day delivery. The frame is packaged separately and comes complete with assembly instructions, a storage bag and anchoring tie down kit for soft standing ground.
Dye sublimation printed orders (canopies and sidewalls) are likely to be packaged and sent out together, again separate to the frame.

Pop up Gazebo Assembly Instructions

Check out our video on How to Erect a Pop up Gazebo below.
Features our 3m x 4.5m Aluminium Extreme 50 Series pop up gazebo.
Follow these pop up gazebo instructions carefully to avoid pinching your fingers or hands in any of the moving parts as the frame opens and closes. Our larger gazebos require a minimum of two people to erect.
• DO NOT assemble or dismantle your gazebo during adverse weather conditions.
• ALWAYS ensure the gazebo is securely anchored with either a tie down kit or with leg weights.
• NEVER leave your gazebo unattended before it has been securely anchored.
• Our gazebos are not permanent structures and SHOULD NOT be left unattended for prolonged periods of time (especially during adverse and/or windy weather conditions).
• Damage caused through improper use or incorrect anchoring of structures (in adverse weather) will not be covered under our warranty.

How to Assemble your Pop up Gazebo

Gazebo-Assembly-Step-1
Place the gazebo frame in the desired location and gently pull the outer frame legs partially with a second person assisting on the opposite side.

Gazebo-Assembly-Step-2
Place the canopy over the partially open frame and align three of the four corners. Lift the frame by the lower part of the truss bars until the frame is fully opened.

Gazebo-Assembly-Step-3
Lock the slider bracket into place by holding the frame with one hand and lifting the slider bracket up into place until it locks. Once the upper part of the pop up gazebo is locked into place you can then pull down the canopy.
Lift up each leg and slowly pull out the inner leg until it pops into place. Repeat with each leg and adjust height by using the pull pin adjuster.

 

How to Dismantle your Pop up Gazebo

Gazebo-Dismantle-Step-1
Hold the pop up gazebo outer leg, pull the pull pin height adjuster and slowly lower the frame until leg is fully retracted. Repeat this operation with each leg.
Gazebo-Dismantle-Step-2
Unlock the pull pin slider bracket and pull the slider bracket down slowly until the bracket is free from the locked position.
 
Gently push frame inward from the outer legs allowing the pop up gazebo frame to fold inward and close. Be careful not to pinch your fingers in the pop up gazebo during closing!
Completely fold the frame, making sure the pop up gazebo canopy is not trapped between the cross bars.

PLEASE REMEMBER TO BE CAREFUL NOT TO PINCH FINGERS OR HANDS.

How to Attach Tie Down Kits

Best practice is to anchor the straps to the frame itself, and not the canopy. If the straps are attached to the canopy in severe wind, this can cause the material to rip and is void under warranty.

 

Previous article Custom Printed Street food market stall Next article Turn around Wood